G&J Pepsi-Cola Bottlers reversed a US$9 million yearly loss and earned a US$30 million return over three years after moving field service and sales onto Microsoft Dynamics 365.
Field service management is the work of running every service call until the invoice is paid. The costliest leak in that work is the second visit a job should never have needed.
Field service management is how a business runs the work its people do at a customer's site. It covers each service call until the customer has paid the bill. Microsoft calls that chain the service-to-cash flow, and Dynamics 365 Field Service is the app built to run it.
Every handoff in field service management is a place where a job can lose money. A business that runs on a whiteboard and paper work orders loses a little at each step. The biggest loss comes when a technician has to go back to finish a job the first visit should have closed. At Canadian wage and mileage rates, one of those return trips can cost about $118.80, and the customer never sees a line for it on the invoice.
To show where the money goes, we'll follow one job at a Canadian commercial refrigeration contractor with 12 technicians on the road. A restaurant calls because its walk-in cooler has stopped holding temperature, and the owner is already doing sums on everything stored inside.
The job passes through five stages, and we'll show each stage two ways. On the whiteboard, field service management runs on paper and the money slips away. In Field Service, the same stage runs in Dynamics 365.
Talk through your service calls with our team
Gestisoft implements Dynamics 365 Field Service for Canadian service businesses.
Book a free consultation
What is field service management?
Field service management covers the scheduling, stocking, recording and billing behind every job done at a customer's site. In software terms, it means one system holds each job right through to the invoice, so the office and the technician work from the same record.
Microsoft tracks every work order in Dynamics 365 Field Service through five main system statuses, plus a canceled status for jobs that don't go ahead.
- The call becomes a work order. The job is logged against the customer's equipment, and its status is unscheduled.
- A dispatcher books a technician. The job goes onto the schedule board, and the status changes to scheduled.
- The technician heads out. The status switches to in progress once the van is on the way, and it stays there during the repair.
- The job is closed on site. The technician logs the parts and time used, and the status becomes completed.
- The job is billed. A back-office worker reviews the work order and moves it to posted, which generates the invoice.
Microsoft builds Field Service around five roles, and each one handles a different part of a service job.
- Customer service agents take incoming requests and decide when a job needs a work order.
- Dispatchers book technicians on the schedule board.
- Field technicians do the work on site with the mobile app.
- Inventory managers keep the vans stocked and handle returns and new purchases.
- Service managers track performance and look for ways to run the team more efficiently.
Dynamics 365 Field Service gives each of them a view of the same work order, which is the whole point of field service management software. The office works from a web browser, and technicians get the same record on a phone or tablet.
G&J Pepsi-Cola Bottlers is the largest independent Pepsi bottler in the United States, with 13 locations and 2,000 employees. Before choosing new software, G&J reviewed every business process and uncovered more than 200 issues across 150 of them. After moving sales and field service onto one Dynamics 365 platform, the company reversed a US$9 million yearly loss and reported a US$30 million return over three years. The restaurant job is that same field service management review, done on a single call.
What happens when a field service call comes in?
The restaurant's phone call becomes a work order, which starts life in Dynamics 365 Field Service as an unscheduled job. Every later stage of field service management works from that record, so the details logged at the start set how well the rest of the job goes.
On the whiteboard. Whoever picks up writes "Bistro, cooler warm" on a sticky note with a number to call back. The note leaves out the make of the cooler and the fact that a technician replaced a part on the same unit last spring, because those details live in someone's memory or a filing cabinet.
In Field Service. The call creates a work order linked to the restaurant's account and to the cooler, which is set up as a customer asset with its own repair history. Microsoft builds each work order from a checklist of tasks, the parts to use, the labour to bill and the skills the job needs. A phone call is only one way in, since field service work orders can also start from an email or a web portal. Maintenance agreements and sensors on the equipment can create them too.
Each work order also has a type, so an inspection and a repair call are recorded differently. This one is a standard service call, and the dispatcher can mark it high priority because there's food in the cooler.
Can customers book a field service call themselves?
Customers can log their own requests through a web portal, and each one becomes a work order the dispatcher sees with every other job. Once a technician is booked, Field Service can send the customer reminders and updates by email and text.
For the restaurant owner, the request is logged before a phone call would have ended. The office skips the typing in this part of field service management, and the sticky note has one less chance to slide behind the monitor.
How do you pick the right technician in field service management?
The right technician is the one who fits the job best on location, availability, skills and priority. Once the dispatcher books the restaurant job, the work order status changes to scheduled.
On the whiteboard. The dispatcher sends whoever is closest and free. That plan works well until the nearest one turns out to spend most of the year on furnaces.
In Field Service. The dispatcher works from a schedule board that shows each technician's day as a row of booked jobs, next to a map with routes and live traffic. The schedule assistant matches technicians to the skills the work order lists, so the cooler job goes to someone set up for refrigeration. A dispatcher can drag the job onto a technician by hand, and resource scheduling optimization is a Microsoft add-in that books a whole day's jobs automatically.
In Ontario, every person who handles refrigerant needs an Ozone Depletion Prevention certificate card, but holding one doesn't qualify a technician to repair the equipment. Fixing a cooler also takes a Certificate of Qualification as a refrigeration and air conditioning mechanic. A contractor there can record both credentials as skills on each technician's profile, so the board only offers the cooler job to people who hold them.
G&J's dispatchers adjust schedules during the day so technicians can reach urgent problems, such as water leaks at major accounts. Good field service dispatch software lets the dispatcher make that change once, and the technician's phone shows the new booking.
Why do field technicians have to come back for a second visit?
A technician goes back when the first visit left without something the job needed, such as the right part or the equipment's history. Service teams call that return job a callback. The business pays for both trips and bills the customer for one repair, so every second truck roll comes straight off the margin in field service management.
On the whiteboard. The technician reaches the restaurant and finds a failed fan motor. The replacement is on a shelf at the shop, which is the one place the technician isn't. The restaurant gets a promise of tomorrow and a kitchen full of food on borrowed ice.
In Field Service. The technician opens the work order on the mobile app and sees the cooler's repair history before leaving the shop. Dynamics 365 treats each truck as a warehouse, so stock in the van is tracked the same way as the shop's, and parts logged on a job come off that count. G&J's mobile app also shows managers how many times a technician has been back to the same customer.
“The Dynamics 365 mobile app is great because it's real-time. It helps us to provide KPIs—we can pull in reports, see how many calls this account has, how many times we've been back, and if their equipment needs to be replaced.”
G&J's first-time fix rate improved after the move, which meant fewer return visits and less spent on the mileage and fuel those trips burn. The company's technicians also had the parts and information to finish more jobs in one trip.
Fewer second visits start here
Route optimization software trims the kilometres between one job and the next.
AI in Dynamics 365 Field Service puts Copilot summaries of each work order on the technician's phone.
How much does a second field service visit cost?
In field service management, a return trip costs the technician's hours and the vehicle's kilometres. Both are easy to price with your own figures.
- Labour. Multiply what your technician costs per hour by the time the second trip takes, travel included.
- Vehicle. Multiply the round-trip kilometres by a cost per kilometre. Without a cost figure of your own, use the 2026 limit the Department of Finance Canada set for tax-free allowances paid to employees who drive their own vehicles for work, which is 73 cents for the first 5,000 kilometres.
A worked example with Canadian figures
Job Bank puts the median wage for heating, refrigeration and air conditioning mechanics in Canada at $37.50 an hour.
- Take a second visit that runs two hours with travel and covers a 60-kilometre round trip.
- Two hours of labour comes to $75.00 before benefits and payroll costs.
- 60 kilometres of driving comes to $43.80 at 73 cents a kilometre.
- One return trip costs $118.80, and none of it goes on the customer's bill.
- Ten return trips a month add up to $1,188 and 20 technician hours that could have gone to paying jobs.
At those figures, $1,188 a month would cover eight Dynamics 365 Field Service licences at CAD $142.50 each.
Run the same sums with your own wage rate and the number of second visits your team makes in a month. Then weigh that monthly total against the cost of field service management software.
Book a call about your second visits
Gestisoft sets up truck stock and equipment history in Dynamics 365 Field Service for Canadian service teams.
Book a free consultation
What should a technician record before leaving a field service job?
A technician should log every detail the invoice and the equipment's history depend on before the van pulls away, because field service management builds both from that record. Once those details are saved, the restaurant work order is marked completed.
On the whiteboard. The technician fills in a paper work order in the van after the second visit. The new fan motor gets written down, while the gasket fitted with it doesn't.
In Field Service. The technician closes the job on the mobile app during the first visit. The app captures what the office has to bill and what the next technician or an inspector should know.
- Photos and videos of the cooler before and after the repair
- The customer's signature on the screen
- Every part and service used, which updates the van's stock
- A flag that the job is complete or needs a follow-up visit
- The type and amount of refrigerant used, which Ontario requires certified technicians to keep on record for at least 2 years
A walk-in cooler at the back of a kitchen can be a poor spot for a phone signal, so the app downloads each job to the device for offline work and syncs later. Field service mobile software has to work for a technician with one hand on a fan housing.
Inspections using Dynamics 365 Field Service put safety checklists on the same screen, ticked off during the job. The moment the technician marks the job complete, the dispatcher sees the change on the schedule board. G&J's managers can see when a task was done and how, without chasing the technician for it.
“Everything is more visible and automated now. There are no worries about when it was done, how it was done—this task is completed.”
G&J gets that visibility across 13 locations, and a single cooler repair benefits the same way on a much smaller scale. The restaurant owner has a cold cooler after the first visit, and the office has a completed work order with the gasket on it. On the whiteboard, the same paperwork would have spent a week in the van's door pocket beside a coffee cup.
How do you invoice a service call faster in field service management?
The fastest route is billing straight from the completed work order, because nothing has to be retyped. In Dynamics 365 Field Service, a back-office worker reviews the restaurant job and moves it to posted, and that status generates an invoice for the parts and labour used.
On the whiteboard. The paper work order reaches the office days later and someone types it into the accounting software. The invoice goes out three weeks after the repair without the gasket, by which time the restaurant owner's gratitude has cooled faster than the walk-in did.
In Field Service. Completing the work order updates the cooler's repair history and the van's stock. A part fitted during the job can be added to the customer's equipment record, so the next technician sees the new fan motor on the cooler.
G&J now handles the paperwork side of field service management in seconds, where it used to take weeks. The company's service work runs through Dynamics 365 and Power Automate, which is Microsoft's tool for automating steps between apps.
“We've been able to streamline 180,000 manual steps, which once took 7 to 10 days each, down to 35 seconds, using Power Automate and Dynamics 365.”
A single cooler repair sends far fewer steps through field service management than G&J's 180,000, and its invoice is generated the moment the work order is posted. The owner gets the bill in the same week the cooler comes back down to temperature.
Does Dynamics 365 Field Service work with Business Central?
Microsoft builds an integration that connects Field Service to Business Central, which is Microsoft's accounting and operations software for small and midsize businesses. When a technician completes a job in Field Service, the matching service order in Business Central is marked as finished and ready for the finance team to post and invoice. The invoiced quantities then flow back to the work order in Field Service, and this service management link needs a Business Central Premium licence.
Field service management and the books then share one set of figures. Field service integration can bring other systems into the same flow. Talk to Gestisoft about how your own work orders reach the invoice.
Which field service management model does your business run?
Microsoft describes four service delivery models, and many businesses run a mix of them. The mix you run decides how many field service management jobs start as emergencies like the restaurant's warm cooler.
- Reactive. A customer reports a problem and the dispatcher sends someone. This is the restaurant job.
- Preventive. A field service agreement sets recurring visits, and the app creates the work orders automatically at the agreed intervals.
- Predictive. A sensor on the equipment spots a problem and creates an alert or a work order through Connected Field Service.
- Project-based. A large job runs over several days with specialists working in sequence, such as a full kitchen refit.
A contract with the restaurant would put the cooler on regular checks, and Microsoft designs agreement-based maintenance to cut downtime and head off emergency repairs. In field service management, the best call is the one the restaurant never has to make.
How much does Dynamics 365 Field Service cost in Canada?
Dynamics 365 Field Service costs CAD $142.50 per user per month on a yearly plan, and that price covers staff who use the full app. Microsoft also sells a Field Service Contractor licence at CAD $67.80 per user per month for outside technicians on the same terms.
The Contractor licence brings outside firms into the same field service management system, which suits a business that passes on overflow jobs. Setup by a Microsoft partner is priced on top of the licences, and Business Central is licensed separately.
Talk to our team before your field service rollout
Gestisoft is a Microsoft Solutions Partner for Canadian field service teams.
Free discovery call
How does Gestisoft support field service management after go-live?
A dedicated Customer Success Manager works with each Gestisoft client from go-live and into the first weeks when technicians start running paying jobs on the new setup. A system can pass every test and still hit problems once the phones get busy, such as a part that was never added to a van's stock or a job type that doesn't produce an invoice.
The Customer Success Manager configures and troubleshoots those issues as they come up, so technicians stay on the app once the novelty wears off and field service management doesn't slide back onto paper.
“Working with Customer Success means having a team that's dedicated to our business and our needs. This team includes the Customer Success Manager as well as technical advisors and architects.”
Gestisoft's support plan lets a business buy extra hours as the work calls for them, and any unused balance rolls forward. A refrigeration contractor can bank hours through the quiet months and spend them in July, when every walk-in in town is working overtime. Support coordinators handle each ticket and request, and clients book their coaching sessions themselves.
Because Gestisoft implements Business Central as well as Field Service, the restaurant's work order and the invoice it becomes are built by the same team. That covers every stage of field service management the cooler repair went through, from the technician skills on the schedule board to the posting that sends the bill.
Every Gestisoft implementation includes an evolution step after the system goes live. For field service management, that step is where maintenance agreements or sensor-driven work orders get added once the basics are running smoothly.
-
It's the planning and running of work done at customer sites, starting with the service call and ending with the paid invoice. The work includes scheduling technicians, stocking their vehicles, recording each job and billing for it.
Liked what you just read? Sharing is caring.
October 21, 2026 by Shelley Sunjka by Shelley Sunjka Copywriter & Marketing Strategist
Armed with a psychology degree and an irrational obsession with okapis, I've spent the last decade helping bold brands tell better stories. I believe the best writing bends grammar rules on purpose and makes people feel something. When I'm not deep in words or nerding out on buyer behaviour, I'm probably convincing my kids that impromptu kitchen dance parties are totally normal.

